Catalogue > CYLINDERS > VALVES & MANIFOLDS

Showing 1 - 35 of 35 > Page 1 of 1

Black Extra Long Cylinder Valve Handle

Tough high grip Black rubber cylinder valve handle with extra-long ribbed form to allow easy & comfortable operation of a cylinder valve, even whilst wearing the thickest neoprene or dry gloves. Suitable for quick and easy fitting on to any Beaver Cylinder Valve or Manifold.

Product Code(s):
CV HAN BK

RRP: £7.25

Green Extra Long Cylinder Valve Handle

Tough high grip rubber cylinder valve handle, Green colour to distinguish use with Nitrox filled cylinders. Extra-long ribbed form to allow easy & comfortable operation of your cylinder valve even whilst wearing the thickest neoprene or dry gloves. Fast and simple to install, suitable as a replacement for all Beaver Sports huge range of SCUBA Diving and Air Gun Valves,

Product Code(s):
CV HAN GN

RRP: £7.25

232 Bar XFlow Cylinder Valve M25X2 EN-144-1 Thread

Super high quality single cylinder pillar valve with M25x2 thread with EN-144-3 outlet fitting for 232 Bar DIN or A-Clamp regulators. Suitable for use with all SCUBA Diving cylinders manufactured to European PED Standard EN-144. Can be used either with INT/A-Clamp type or DIN G5/8” regulator 1st Stages. Supplied as standard with extra-long valve handle which ensures ease of use even when wearing the thickest types of diving gloves. All parts are Nitrox compatible with Viton O-Rings etc. the cylinder valve will require cleaning for Nitrox use in an O2 clean environment before used with Oxygen enriched gas. Beaver supply service kits for this ultra-reliable and rugged tank valve for use during routine servicing, please see our part number CVSK. Probably Europe’s most widely used and highly rated dive cylinder valve, these have provided many years’ service to thousands of divers and are the only type trusted by many military and commercial divers.

Product Code(s):
CV S 144

RRP: £49.50

300 Bar XFlow Cylinder Valve M25X2 EN-144-1

Supreme performance in high pressure 300 Bar air delivery is provided by this extreme high quality SCUBA Diving or Air Gun pillar valve. M25x2 thread to suit all EN-144 type cylinders manufactured to the stringent European Union PED regulations. Outlet is achieved to regulator 1st stages with the EN-144-3 outlet fitting with G5/8” thread for use with 300 Bar DIN type regulator 1st stages and Air Gun charging valves. The first choice of demanding divers throughout Europe, Beaver cylinder valves have earned a reputation for reliability due to providing air without any fuss or problems. Extensively used by the Military and in Commercial diving applications, where the high quality and extreme durability has been recognised for many years. Extra Long handle is fitted as standard to ensure ease of use, even when wearing thick neoprene gloves in the extreme cold. For details of our single outlet cylinder valve service kit, please see our Item Number CVSK.

Product Code(s):
CV S 144 3

RRP: £55.00

300 Bar X-Flow Valve M26 Thread M25X2 EN144

Produced especially for use with the European Specification for M26 threaded 1st Stages on SCUBA Diving Regulators designed for use with NITROX – Oxygen Enriched Breathing Air. EN-144 style M25x2 cylinder thread suitable for use on cylinders manufactured to the rigid criteria laid down by the European Pressure Equipment Directive. Larger sized M26 threaded EN-144-3 outlet fitting for use with 300 Bar M26 DIN Nitrox type regulators. Fitted with extra-long valve control handle to allow ease of use when wearing gloves and all O-Rings etc. are manufactured from Viton and the cylinder valve requires O2 certification during assembly with a cylinder. Beaver cylinder valves are renowned for their uncompromising reliability and used and solely trusted by commercial and military divers worldwide. For details of our single outlet cylinder valve service kit, please see our Item Number CVSK.

Product Code(s):
CV S 26 3

RRP: £35.95

232 Bar X-Flow Cylinder Valve 3/4 BSP Thread

Cylinder Valve to suit original British Standard SCUBA diving cylinders with 3/4 inch BSP thread on the cylinder. Single outlet valve with extra-long handle allowing easy use when wearing gloves fitted as standard. EN-144-3 compatible outlet, which is simply convertible from INT/A-Clamp to DIN with an Allen Key. For use with 232 Bar A-Clamp or DIN diving regulators, and is supplied with Viton components and other parts suitable for use with Nitrox after cleaning and assembly within an O2 clean environment. For details of our single outlet cylinder valve service kit, please see our Item Number CVSK.

Product Code(s):
CV S 34

RRP: £52.95

232 Bar Twin 5.5" Manifold M25X2 EN-144-1

Twin Manifold for use with 5 and 7 Litre steel cylinders, with M25x2 EN-144-1 style cylinder thread with twin EN-144-3 compatible outlets for use with two 232 Bar DIN G5/8” or INT - A-Clamp regulators. In normal use both regulators will use equal amounts of air from the twin cylinders. A centrally mounted isolating tap allows for each regulator to use the air supply independently from the relevant single cylinder. All three valve controls have extra-long rubber handles fitted as standard equipment to allow easy use when wearing gloves in colder conditions. Suitable for use with twin 140mm diameter, 5 & 7 Litre steel Cylinders with a maximum working pressure of 232 Bar. Supplied with all parts suitable for use with Nitrox – Oxygen enriched breathing air, the Manifold must be cleaned and assembled within an O2 clean environment prior to use with this type of gas. Please see Beaver Sports Product Reference TMSK for the complete service kit for this manifold.

Product Code(s):
CV T5 144

RRP: £180.00

300 Bar Twin 5.5" Manifold M25X2 EN-144-1

Twin Manifold for use with 5 and 7 Litre steel cylinders, with M25x2 EN-144-1 style cylinder thread with twin EN-144-3 compatible outlets for use with two 300 Bar DIN G5/8” Regulator 1st Stages. In normal use both regulators will use equal amounts of air from the twin cylinders. A centrally mounted isolating tap allows for each regulator to use the air supply independently from the relevant single cylinder. All three valve controls have extra-long rubber handles fitted as standard equipment to allow easy use when wearing gloves in colder conditions. Suitable for use with twin 140mm diameter, 5 & 7 Litre steel Cylinders. Supplied with all parts suitable for use with Nitrox – Oxygen enriched breathing air, the Manifold must be cleaned and assembled within an O2 clean environment prior to use with this type of gas. Please see Beaver Sports Product Reference TMSK for the complete service kit for this manifold.

Product Code(s):
CV T5 144 3

RRP: £185.00

232 Bar Twin 5.5" Manifold M26Thread M25x2 EN144-1

Twin Manifold for use with 5 and 7 Litre steel cylinders, with M25x2 EN-144-1 style cylinder thread with twin EN-144-3 compatible outlets for use with two 232 Bar M26 Nitrox Regulator 1st Stages. In normal use both regulators will use equal amounts of air from the twin cylinders. A centrally mounted isolating tap allows for each regulator to use the air supply independently from the relevant single cylinder. All three valve controls have extra-long rubber handles fitted as standard equipment to allow easy use when wearing gloves in colder conditions. Suitable for use with twin 140mm diameter, 5 & 7 Litre steel Cylinders with a maximum working pressure of 232 Bar. Supplied with all parts suitable for use with Nitrox – Oxygen enriched breathing air, the Manifold must be cleaned and assembled within an O2 clean environment prior to use with this type of gas. Please see Beaver Sports Product Reference TMSK for the complete service kit for this manifold.

Product Code(s):
CV T5 26

RRP: £110.00

300 Bar Twin 5.5" Manifold M26 Thread M25X2EN144-1

Twin Manifold for use with 5 and 7 Litre steel cylinders, with M25x2 EN-144-1 style cylinder thread with twin EN-144-3 compatible outlets for use with two 300 Bar M26 Nitrox Regulator 1st Stages. In normal use both regulators will use equal amounts of air from the twin cylinders. A centrally mounted isolating tap allows for each regulator to use the air supply independently from the relevant single cylinder. All three valve controls have extra-long rubber handles fitted as standard equipment to allow easy use when wearing gloves in colder conditions. Suitable for use with twin 140mm diameter, 5 & 7 Litre steel Cylinders with a maximum working pressure of 300 Bar. Supplied with all parts suitable for use with Nitrox – Oxygen enriched breathing air, the Manifold must be cleaned and assembled within an O2 clean environment prior to use with this type of gas. Please see Beaver Sports Product Reference TMSK for the complete service kit for this manifold.

Product Code(s):
CV T5 26 3

RRP: £114.00

Manifold Centre Section 5.5" With Isolator

Manifold centre section with isolating valve which is compatible with all Beaver manifolds & modular cylinder valves, to either create a complete manifold or use as a spare or replacement. For use with 140mm diameter, 5 & 7 Litre Cylinders.

Product Code(s):
CV T5C

RRP: £59.50

232 Bar Twin 7" Manifold M25X2 EN-144-1

Twin Manifold for use with 10 and 12 Litre steel cylinders, with M25x2 EN-144-1 style cylinder thread with twin EN-144-3 compatible outlets for use with two 232 Bar G5/8” DIN or INT – A Clamp Regulator 1st Stages. In normal use both regulators will use equal amounts of air from the twin cylinders. A centrally mounted isolating tap allows for each regulator to use the air supply independently from the relevant single cylinder. All three valve controls have extra-long rubber handles fitted as standard equipment to allow easy use when wearing gloves in colder conditions. Suitable for use with twin cylinders, both with a diameter of between 171 and 178 mm, 10 & 12 Litre steel Cylinders with a maximum working pressure of 232 Bar. Supplied with all parts suitable for use with Nitrox – Oxygen enriched breathing air, the Manifold must be cleaned and assembled within an O2 clean environment prior to use with this type of gas. Please see Beaver Sports Product Reference TMSK for the complete service kit for this manifold.

Product Code(s):
CV T7 144

RRP: £185.00

300 Bar Twin 7" Manifold M25X2 EN-144-1

Twin Manifold for use with 10 and 12 Litre steel cylinders, with M25x2 EN-144-1 style cylinder thread with twin EN-144-3 compatible outlets for use with two 300 Bar G5/8” DIN Regulator 1st Stages. In normal use both regulators will use equal amounts of air from the twin cylinders. A centrally mounted isolating tap allows for each regulator to use the air supply independently from the relevant single cylinder. All three valve controls have extra-long rubber handles fitted as standard equipment to allow easy use when wearing gloves in colder conditions. Suitable for use with twin cylinders, both with a diameter of between 171 and 178 mm, 10 & 12 Litre steel Cylinders with a maximum working pressure of 300 Bar. Supplied with all parts suitable for use with Nitrox – Oxygen enriched breathing air, the Manifold must be cleaned and assembled within an O2 clean environment prior to use with this type of gas. Please see Beaver Sports Product Reference TMSK for the complete service kit for this manifold.

Product Code(s):
CV T7 144 3

RRP: £190.00

232 Bar Twin 7" Manifold M26 Thread M25X2 EN144-1

Twin Manifold for use with 10 and 12 Litre steel cylinders, with M25x2 EN-144-1 style cylinder thread with twin EN-144-3 compatible outlets for use with two 232 Bar M26 Nitrox Regulator 1st Stages. In normal use both regulators will use equal amounts of air from the twin cylinders. A centrally mounted isolating tap allows for each regulator to use the air supply independently from the relevant single cylinder. All three valve controls have extra-long rubber handles fitted as standard equipment to allow easy use when wearing gloves in colder conditions. Suitable for use with twin cylinders, both with a diameter of between 171 and 178 mm, 10 & 12 Litre steel Cylinders with a maximum working pressure of 232 Bar. Supplied with all parts suitable for use with Nitrox – Oxygen enriched breathing air, the Manifold must be cleaned and assembled within an O2 clean environment prior to use with this type of gas. Please see Beaver Sports Product Reference TMSK for the complete service kit for this manifold.

Product Code(s):
CV T7 26

RRP: £105.00

300 Bar Twin 7" Manifold M26 Thread M25X2 EN144-1

Twin Manifold for use with 10 and 12 Litre steel cylinders, with M25x2 EN-144-1 style cylinder thread with twin EN-144-3 compatible outlets for use with two 300 Bar M26 Nitrox Regulator 1st Stages. In normal use both regulators will use equal amounts of air from the twin cylinders. A centrally mounted isolating tap allows for each regulator to use the air supply independently from the relevant single cylinder. All three valve controls have extra-long rubber handles fitted as standard equipment to allow easy use when wearing gloves in colder conditions. Suitable for use with twin cylinders, both with a diameter of between 171 and 178 mm, 10 & 12 Litre steel Cylinders with a maximum working pressure of 300 Bar. Supplied with all parts suitable for use with Nitrox – Oxygen enriched breathing air, the Manifold must be cleaned and assembled within an O2 clean environment prior to use with this type of gas. Please see Beaver Sports Product Reference TMSK for the complete service kit for this manifold.

Product Code(s):
CV T7 26 3

RRP: £108.00

Manifold Centre Section 7" With Isolator

Centre Manifold Isolating section compatible with all Beaver manifolds & modular cylinder valves to create a complete manifold or use as a spare or replacement. Suitable for use with 171 - 178mm diameter 10 and 12 Litre Tall Cylinders. 171 TO 178mm, 12 TALL & 10 LITRE CYLINDERS

Product Code(s):
CV T7C

RRP: £61.50

232 Bar Twin 8" Manifold M25X2 EN-144-1

Twin Manifold for use with 18, 15 and 12 Litre Short/Dumpy steel cylinders, with M25x2 EN-144-1 style cylinder thread with twin EN-144-3 compatible outlets for use with two 232 Bar G5/8” DIN or INT – A Clamp Regulator 1st Stages. In normal use both regulators will use equal amounts of air from the twin cylinders. A centrally mounted isolating tap allows for each regulator to use the air supply independently from the relevant single cylinder. All three valve controls have extra-long rubber handles fitted as standard equipment to allow easy use when wearing gloves in colder conditions. Suitable for use with twin cylinders, both with a diameter of approximately 204mm, 18, 15 & 12 Litre Short – Dumpy steel Cylinders with a maximum working pressure of 232 Bar. Supplied with all parts suitable for use with Nitrox – Oxygen enriched breathing air, the Manifold must be cleaned and assembled within an O2 clean environment prior to use with this type of gas. Please see Beaver Sports Product Reference TMSK for the complete service kit for this manifold.

Product Code(s):
CV T8 144

RRP: £190.00

232 Bar Twin 8" Manifold M26 Thread M25X2 EN144-1

Twin Manifold for use with 18, 15 and 12 Litre Short/Dumpy steel cylinders, with M25x2 EN-144-1 style cylinder thread with twin EN-144-3 compatible outlets for use with two 232 Bar M26 Nitrox Regulator 1st Stages. In normal use both regulators will use equal amounts of air from the twin cylinders. A centrally mounted isolating tap allows for each regulator to use the air supply independently from the relevant single cylinder. All three valve controls have extra-long rubber handles fitted as standard equipment to allow easy use when wearing gloves in colder conditions. Suitable for use with twin cylinders, both with a diameter of approximately 204mm, 18, 15 & 12 Litre Short – Dumpy steel Cylinders with a maximum working pressure of 232 Bar. Supplied with all parts suitable for use with Nitrox – Oxygen enriched breathing air, the Manifold must be cleaned and assembled within an O2 clean environment prior to use with this type of gas. Please see Beaver Sports Product Reference TMSK for the complete service kit for this manifold.

Product Code(s):
CV T8 26

RRP: £126.00

Manifold Centre Section 8" With Isolator

Manifold centre section with isolating valve to suit 204mm diameter, 12 Litre Dumpy and 15 Litre cylinders. Compatible with all Beaver manifolds & modular cylinder valves to create a complete manifold or use as a spare or replacement. 204mm, 12 LITRE SHORT & 15 LITRE CYLINDERS

Product Code(s):
CV T8C

RRP: £62.95

232 Bar Top Handled Cylinder Valve

Top Handled Cylinder Valve, for use with 232 Bar working pressure Cylinders with M25x2 thread and EN-144-1 type neck. Outlet has a G5/8” 232 Bar DIN outlet produced to exceed the rigid European EN-144-3 standards. Debris tube and extra-log control handle supplied as standard to ensure ease of use when wearing gloves. Suitable for use with side mounted cylinders or when fast and easy access is required to the valve control. Beaver Sports vast range of cylinder valves have an envious reputation for high quality and continuous high level of performance. For details of the relevant service kit for this valve, please see Beaver’s Product Code CVSK.

Product Code(s):
CV TV 2

RRP: £53.95

300 Bar Top Handled Cylinder Valve

Top Handled Cylinder Valve suitable for use with side mounted cylinders or when fast and easy access is required to the valve control. Designed for use on SCUBA Diving or other types of cylinder fitted with M25X2 – EN-144-1 type thread and neck design, as per the European PED standards. G5/8” EN-144-3 300 Bar DIN outlet for use with cylinders and regulators with a maximum working pressure of 300 Bar. Beaver’s ultra-reliable cylinder valves are extensively used worldwide by sports, commercial and military divers who appreciate their superior performance. For details of the relevant service kit for this valve, please see Beaver’s Product Code CVSK.

Product Code(s):
CV TV 3

RRP: £57.95

232 Bar Top Handled Valve M18 Thread

M18 X 1.5 ISO Top Handled Cylinder Valve with single EN-144-3 type 232 Bar DIN outlet. Ideal for use with smaller size gas cylinders manufactured with M18X1.5 outlet valve thread. Commonly used on Dry Suit/Buoyancy Control Device Systems or smaller Airgun charging cylinders designed for portable use etc.

Product Code(s):
CV TV M18

RRP: £50.75

232 Bar Cylinder Valve DIN Insert

Cylinder Valve DIN insert to fit most Cylinder Valves & Manifolds with G5/8” 232 Bar DIN EN-144-3 type outlets. Simply converts any 232 Bar DIN fitting for use with an INT-A-Clamp type Regulator 1st Stage. Insert in to the DIM recess on a cylinder valve in seconds, tighten with a suitable 8mm Allen Key and easily removed to rapidly convert the cylinder valve back for use with DIN type threaded regulators. O-Rings are manufactured from supreme quality Viton for use with Nitrox – Oxygen enriched breathing air. Perfect for use with Beaver’s entire range of 232 Bar Cylinder Valves as well as all other types with an EN-144-1 compatible gas outlet.

Product Code(s):
CVD

RRP: £7.75

Nitrox Single Cylinder Valve Service Kit

All the necessary component parts required to have a complete service performed on all types of Beaver single outlet cylinder valves. All O-Rings and parts subject to any wear are replaced by a SCUBA Diving technician at each routine maintenance service, ensuring that cylinder vales remain in perfect operational condition. All O-Rings are manufactured from high quality Viton, suitable for use with Nitrox in addition to normal breathing air. 1 Large O-Ring for the M25X2 threaded section between the cylinder and the manifold, 1 stems with new seals and O-Rings, 1 stem retaining nuts with new O-Rings, 1 valve seat seal, 2 O-Rings to go on the DIN Insert only for use on the 232 Bar version. Please see Product Code TMSK for service kit for Beaver Sports twin manifolds.

Product Code(s):
CVSK

RRP: £19.75

Manifold Left Hand Valve M25X2 EN-144-1

Left hand 232 Bar manifold section with M25X2 thread, compatible with all Beaver manifolds & modular valves. With EN-144-3 outlet for 232 Bar DIN or A-Clamp fitting regulators, requires Left side Manifold Blanking Plug if used independently.

Product Code(s):
CVT L 144

RRP: £64.95

Manifold Left Hand Valve 300 Bar M25X2 EN-144-1

300 Bar Manifold Left Hand Valve M25X2 EN-144-1 thread with EN-144-3 outlet for use with 300 Bar DIN regulator 1st stages. Requires Left side Manifold Blanking Plug if used independently.

Product Code(s):
CVT L 144 3

RRP: £69.95

Manifold Left Hand Valve M26 Thread M25X2 EN144-1

232 Bar M26 left hand manifold section with M25x2 EN 144-1 thread, compatible with all Beaver manifolds & modular valves. With EN-144-3 outlet fitting for 232 Bar M26 Nitrox type regulator. Requires Left side Manifold Blanking Plug if used independently.

Product Code(s):
CVT L 26

RRP: £68.50

Manifold Left Hand Valve 300 Bar M26 Thread M25X2

Left hand manifold section with M25x2 EN 144-1 thread, compatible with all Beaver manifolds & modular valves. With 300 Bar EN-144-3 outlet for 300 Bar M26 Nitrox type regulator. Requires Left side Manifold Blanking Plug if used independently.

Product Code(s):
CVT L 26 3

RRP: £72.00

Manifold Right Hand Valve M25X2 EN-144-1

Right hand 232 Bar manifold section with M25X2 thread, compatible with all Beaver manifolds & modular valves. With EN-144-3 outlet for 232 Bar DIN or A-Clamp fitting regulators. Requires Right side Manifold Blanking Plug if used independently.

Product Code(s):
CVT R 144

RRP: £64.95

Manifold Right Hand Valve 300 Bar M25X2 EN-144-1

300 Bar Manifold Right Hand Valve M25X2 EN-144-1 thread with EN-144-3 outlet for use with 300 Bar DIN regulator 1st stages. Requires Right side Manifold Blanking Plug if used independently.

Product Code(s):
CVT R 144 3

RRP: £69.95

Manifold Right Hand Valve M26 Thread M25X2 EN144-1

232 Bar M26 Right hand manifold section with M25x2 EN 144-1 thread, compatible with all Beaver manifolds & modular valves. With EN-144-3 outlet fitting for 232 Bar M26 Nitrox type regulator. Requires Right side Manifold Blanking Plug if used independently.

Product Code(s):
CVT R 26

RRP: £68.50

Manifold Right Hand Valve 300Bar M26 Thread M25X2

Right hand manifold section with M25x2 EN 144-1 thread, compatible with all Beaver manifolds & modular valves. With 300 Bar EN-144-3 outlet for 300 Bar M26 Nitrox type regulator. Requires Right side Manifold Blanking Plug if used independently.

Product Code(s):
CVT R 26 3

RRP: £72.00

Cylinder Manifold Blanking Plug Left

Left Hand Side Manifold Blanking Plug. For use with Beaver manifolds & modular valve system to turn the Left Handed valve opening Manifold Tap section when facing the valve with the air outlet facing towards you into a stand alone valve.

Product Code(s):
MBP L

RRP: £8.50

Cylinder Manifold Blanking Plug Right

Right Hand Side Manifold Blanking Plug. For use with Beaver manifolds & modular valve system to convert the Right Handed Valve opening Manifold Tap section when facing the valve with the air outlet facing towards you into a stand alone valve.

Product Code(s):
MBP R

RRP: £8.50

Nitrox Twin Cylinder Manifold Service Kit

All the necessary components to have a complete service carried out on Beaver twin manifold cylinder valves. 2 Large O-Rings for the M25X2 threaded section between the cylinder and the manifold, 3 stems with new seals and O-Rings, 3 stem retaining nuts with new O-Rings, 3 valve seat seals, 4 O-Rings for the DIN Insert only on the 232 Bar version and 4 O-Rings for the centre manifold section.

Product Code(s):
TMSK

RRP: £27.50

Showing 1 - 35 of 35 > Page 1 of 1