Catalogue > CYLINDERS > ACCESSORIES

Showing 1 - 40 of 70 > Page 1 of 2

Previous 1 2 Next

5.5" (140mm) Single Cylinder Boot - HS CODE - 3926909790 C.O.O. - EU

Heavy Duty Polymer cylinder boot for safe upright storage & protection of most 5 and 7 Litre single SCUBA diving or Air Gun cylinders with a rounded base and diameter of approximately 140mm. Our top quality cylinder boots are especially produced in the EU from high specification polymer compound to protect the base of your cylinders and assist in extending the life of expensive air tanks. Beaver’s cylinder Boots also have vents with ribs and drain holes to allow water to drain away freely to help prevent corrosion.

Product Code(s):
CB S5

RRP: £12.99

7" (171mm) Single Cylinder Boot HS CODE - 3926909790 C.O.O. - EU

Heavy Duty Polymer cylinder boot for safe upright storage & protection of most 10 and 12 Litre single SCUBA diving or Air Gun cylinders with a rounded base and diameter between 171 and 178mm. Our top quality cylinder boots are especially produced in the EU from high specification polymer compound to protect the base of your cylinders and assist in extending the life of expensive air tanks. Beaver’s cylinder Boots also have vents with ribs and drain holes to allow water to drain away freely to help prevent corrosion.

Product Code(s):
CB S7

RRP: £18.50

8" (204mm) Single Cylinder Boot HS CODE - 3926909790 C.O.O. - EU

Heavy Duty Polymer cylinder boot for safe upright storage & protection of most 15 and 18 Litre single SCUBA diving or Air Gun cylinders with a rounded base and diameter of approximately 204mm. Our top quality cylinder boots are especially produced in the EU from high specification polymer compound to protect the base of your cylinders and assist in extending the life of expensive air tanks. Beaver’s cylinder Boots also have vents with ribs and drain holes to allow water to drain away freely to help prevent corrosion.

Product Code(s):
CB S8

RRP: £20.75

5.5" Twin Cylinder Boot - HS CODE - 3926909790 C.O.O. - EU

Heavy Duty Polymer twin cylinder boot for safe upright storage & protection of most 5 and 7 Litre double SCUBA diving or Air Gun cylinder sets with a rounded base and diameter of approximately 140mm and centre to centre of the cylinders of approximately 15cm. Our top quality cylinder boots are especially produced in the EU from high specification polymer compound to protect the base of your cylinders and assist in extending the life of expensive twin air tanks. Beaver’s cylinder Boots also have vents with ribs and drain holes to allow water to drain away freely to help prevent corrosion.

Product Code(s):
CB T5

RRP: £27.95

7" Twin Cylinder Boot - HS CODE - 3926909790 C.O.O. - EU

Heavy Duty Polymer double cylinder boot for safe upright storage & protection of most 10 and 12 Litre twin SCUBA diving or Air Gun cylinder sets with a rounded base and diameter of between 171 and 178mm and centre to centre of the cylinders of approximately 18.5cm. Our top quality twin cylinder boots are especially produced in the EU from high specification polymer compound to protect the base of your cylinders and assist in extending the life of expensive twin sets. Beaver’s cylinder Boots also have vents with ribs and drain holes to allow water to drain away freely to help prevent corrosion.

Product Code(s):
CB T7

RRP: £38.75

Cylinder Carry Handle - HS CODE - 9506290000 C.O.O. - IT

Ultra tough, hard wearing cylinder carrying handle for comfortable & convenient carrying of SCUBA Diving and Air Gun cylinders. Manufactured from high quality polymer and designed specially to ensure cylinders are simply moved in a safe manner particularly when taken for filling, stored correctly and without causing any unnecessary damage. Will fit virtually all cylinders with a standard 395mm diameter neck above 5 Litre in size and is simply and securely attached to a cylinder in a few minutes using an Allen Key. Metal parts are all produced from 316 Marine Grade Corrosion resistant stainless steel, ensuring there is no risk of rust near your valuable cylinder even when used continuously in sea water.

Product Code(s):
CCH

RRP: £17.95

Cylinder Carrying Strap - HS CODE - 9506290000 C.O.O. - TW

How many times have you seen other divers struggling to carry their cylinder incorrectly by pulling and lifting from the valve? Beaver Sports understand how much expensive damage can be done by transporting your cylinder to and from your dive site and going for charging at your local filling station. As a solution we have created the Beaver Cylinder Carry Strap which features heavy duty webbing straps with comfortable moulded rubber handle making carrying heavy cylinders simply a pleasure and will also help prevent unnecessary damage to yourself and your equipment. Designed to fit a huge selection of cylinders with diameters between 135 and 210MM.

Product Code(s):
CCS

RRP: £24.75

Magnetic Compressed Gas Symbol - HS CODE - 39191099 C.O.O. - GB

Magnetic 11cm square ‘Compressed Gas’ hazard warning Symbol, to be displayed on vehicles for safety purposes when transporting charged SCUBA Diving, Air Gun or other high pressure air cylinders containing compressed breathing air on the highways. Simply attached to any flat steel panel on a vehicle when required and removed when not transporting charged cylinders.

Product Code(s):
CGM

RRP: £3.15

Compressed Gas Sticker - HS CODE - 39191099 C.O.O. - GB

Vinyl self-adhesive sticker to be displayed on vehicles for safety purposes when transporting charged air cylinders containing compressed breathing air on the highways. Diamond shape measuring 11cm square, this hazard warning symbol can be quickly and easily applied to any flat surface on a vehicle. Top quality screen printing on weather resistant high grade vinyl this self-adhesive label is designed to display that a vehicle is carrying SCUBA Diving, Air Gun or other high pressure cylinders charged with compressed air.

Product Code(s):
CGS

RRP: £1.50

Heavy Duty 7" (180mm) Cylinder Mesh Black - HS CODE - 3916909000 C.O.O. - TW

Strong Protective Heavy duty PVC mesh sleeve that is custom designed to prevent scratches and chips appearing in cylinder paintwork when in use, laid down or transported. Measures 24 1/2 inches/ 62 CMS in length and can be simply cut down if required, to suit 10 or 12 Litre High Pressure SCUBA Diving or Air Gun cylinders with a diameter between 171 and 178mm. Helps increase the life of expensive cylinders and keep the paint and finish intact by giving them the protection they deserve from the harsh conditions of regular use. COLOUR: BLACK.

Product Code(s):
CM 7 BK

RRP: £10.95

Heavy Duty 7" (180mm) Cylinder Mesh Yellow - HS CODE - 3916909000 C.O.O. - TW

Strong Protective Heavy duty PVC mesh sleeve, specially designed to prevent scratches and chips causing damage to SCUBA Diving or Air Gun cylinders when in use, laid down or being transported. Measures 24 12 inches/ 62 CMS in length and can be easily cut down if required, to suit 10 or 12 Litre cylinders with a diameter between 171 and 178mm. Help to increase the life of expensive cylinders and keep the paint and finish in great condition by providing suitable protection rom the harsh conditions of regular use. COLOUR: BRIGHT YELLOW.

Product Code(s):
CM 7 YW

RRP: £10.95

Heavy Duty 8" (215mm) Cylinder Mesh Black - HS CODE - 3916909000 C.O.O. - TW

Strong Protective Heavy duty PVC mesh sleeve, custom designed to minimise the risk of damaging scratches and chips appearing in the cylinder paintwork when in use, laid down or transported. Measures 24 1/2 inches/ 62 CMS long and can be easily cut down in length if required, to suit 12 or 15 Litre cylinders with a diameter of approximately 204mm. Increase the life of expensive high pressure cylinders, keep the paint and finish intact and give them the protection they deserve from the harsh conditions of regular use. COLOUR: BLACK.

Product Code(s):
CM 8 BK

RRP: £10.95

Heavy Duty 8" (215mm) Cylinder Mesh Yellow - HS CODE - 3916909000 C.O.O. - TW

Strong Protective Heavy duty PVC mesh sleeve which has been specially designed to prevent scratches and chips appearing in the cylinder paintwork when in use, laid down or transported. Measures 24 1/2 inches/ 62 CMS in length and can be simply cut down if required, to suit 12 or 15 Litre SCUBA diving or Air Gun cylinders with a diameter of approximately 204mm. Help to increase the life of your expensive cylinders and keep the paint and finish intact by giving them the protection they deserve from the harsh conditions of regular use. COLOUR: BRIGHT YELLOW.

Product Code(s):
CM 8 YW

RRP: £10.95

10 Litre Blue Cylinder Net HS CODE - 3926909290 C.O.O. - EU

Bright Blue woven high density nylon mesh net provides an unbeatable level of protection for cylinders during use and transport. Drawstring cord top and bottom closure provides streamlined accurate fit ensuring strength and security, also covers and protects the base and neck. To suit 10 Litre steel cylinders with a diameter of approximately 171mm and 590mm in length.

Product Code(s):
CNT 10 BE

RRP: £16.25

10 Litre Black Cylinder Net- HS CODE - 3926909290 C.O.O. - EU

Black woven high density nylon mesh net provides an unbeatable level of protection for cylinders during use and transport. Drawstring cord top and bottom closure provides streamlined accurate fit ensuring strength and security, also covers and protects the base and neck. To suit 10 Litre steel cylinders with a diameter of approximately 171mm and 590mm in length.

Product Code(s):
CNT 10 BK

RRP: £16.25

10 Litre Yellow Cylinder Net - HS CODE - 3926909290 C.O.O. - EU

Bright Yellow, woven high density nylon mesh net provides an unbeatable level of protection for cylinders during use and transport. Drawstring cord top and bottom closure provides streamlined accurate fit ensuring strength and security, also covers and protects the base and neck. To suit 10 Litre steel cylinders with a diameter of approximately 171mm and 590mm in length.

Product Code(s):
CNT 10 YW

RRP: £16.25

12 Litre Dumpy Blue Cylinder Net - HS CODE - 3926909290 C.O.O. - EU

Bright Blue woven high density nylon mesh net provides an unbeatable level of protection for cylinders during use and transport. Drawstring cord top and bottom closure provides streamlined accurate fit ensuring strength and security, also covers and protects the base and neck. To suit 12 Litre Dumpy/Short steel cylinders with a diameter of approximately 204mm and 535mm in length.

Product Code(s):
CNT 12D BE

RRP: £16.25

12 Litre Dumpy Black Cylinder Net - HS CODE - 3926909290 C.O.O. - EU

Black woven high density nylon mesh net provides an unbeatable level of protection for cylinders during use and transport. Drawstring cord top and bottom closure provides streamlined accurate fit ensuring strength and security, also covers and protects the base and neck. To suit 12 Litre Dumpy/Short steel cylinders with a diameter of approximately 204mm and 535mm in length.

Product Code(s):
CNT 12D BK

RRP: £16.25

12 Litre Dumpy Yellow Cylinder Net - HS CODE - 3926909290 C.O.O. - EU

Bright Yellow, woven high density nylon mesh net provides an unbeatable level of protection for cylinders during use and transport. Drawstring cord top and bottom closure provides streamlined accurate fit ensuring strength and security, also covers and protects the base and neck. To suit 12 Litre Dumpy/Short steel cylinders with a diameter of approximately 204mm and 535mm in length.

Product Code(s):
CNT 12D YW

RRP: £16.25

12 Litre Standard Blue Cylinder Net - HS CODE - 3926909290 C.O.O. - EU

Bright Blue woven high density nylon mesh net provides an unbeatable level of protection for cylinders during use and transport. Drawstring cord top and bottom closure provides streamlined accurate fit ensuring strength and security, also covers and protects the base and neck. To suit 12 Litre Standard/Tall steel cylinders with a diameter of approximately 171mm and 700mm in length.

Product Code(s):
CNT 12S BE

RRP: £16.25

12 Litre Standard Black Cylinder Net - HS CODE - 3926909290 C.O.O. - EU

Black woven high density nylon mesh net provides an unbeatable level of protection for cylinders during use and transport. Drawstring cord top and bottom closure provides streamlined accurate fit ensuring strength and security, also covers and protects the base and neck. To suit 12 Litre Standard/Tall steel cylinders with a diameter of approximately 171mm and 700mm in length.

Product Code(s):
CNT 12S BK

RRP: £16.25

12 Litre Standard Yellow Cylinder Net - HS CODE - 3926909290 C.O.O. - EU

Bright Yellow, woven high density nylon mesh net provides an unbeatable level of protection for cylinders during use and transport. Drawstring cord top and bottom closure provides streamlined accurate fit ensuring strength and security, also covers and protects the base and neck. To suit 12 Litre Standard/Tall steel cylinders with a diameter of approximately 171mm and 700mm in length.

Product Code(s):
CNT 12S YW

RRP: £16.25

15 Litre Blue Cylinder Net - HS CODE - 3926909290 C.O.O. - EU

Bright Blue woven high density nylon mesh net provides an unbeatable level of protection for cylinders during use and transport. Drawstring cord top and bottom closure provides streamlined accurate fit ensuring strength and security, also covers and protects the base and neck. To suit 15 Litre steel cylinders with a diameter of approximately 204mm and 635mm in length.

Product Code(s):
CNT 15 BE

RRP: £16.25

15 Litre Black Cylinder Net - HS CODE - 3926909290 C.O.O. - EU

Black woven high density nylon mesh net provides an unbeatable level of protection for cylinders during use and transport. Drawstring cord top and bottom closure provides streamlined accurate fit ensuring strength and security, also covers and protects the base and neck. To suit 15 Litre steel cylinders with a diameter of approximately 204mm and 635mm in length.

Product Code(s):
CNT 15 BK

RRP: £16.25

15 Litre Yellow Cylinder Net - HS CODE - 3926909290 C.O.O. - EU

Bright Yellow, woven high density nylon mesh net provides an unbeatable level of protection for cylinders during use and transport. Drawstring cord top and bottom closure provides streamlined accurate fit ensuring strength and security, also covers and protects the base and neck. To suit 15 Litre steel cylinders with a diameter of approximately 204mm and 635mm in length.

Product Code(s):
CNT 15 YW

RRP: £16.25

7 Litre Blue Cylinder Net - HS CODE - 3926909290 C.O.O. - EU

Bright Blue woven high density nylon mesh net provides an unbeatable level of protection for cylinders during use and transport. Drawstring cord top and bottom closure provides streamlined accurate fit ensuring strength and security, also covers and protects the base and neck. To suit 7 Litre steel cylinders with a diameter of approximately 140mm and 600mm in length.

Product Code(s):
CNT 7 BE

RRP: £16.25

7 Litre Black Cylinder Net - HS CODE - 3926909290 C.O.O. - EU

Black woven high density nylon mesh net provides an unbeatable level of protection for cylinders during use and transport. Drawstring cord top and bottom closure provides streamlined accurate fit ensuring strength and security, also covers and protects the base and neck. To suit 7 Litre steel cylinders with a diameter of approximately 140mm and 600mm in length.

Product Code(s):
CNT 7 BK

RRP: £16.25

7 Litre Yellow Cylinder Net - HS CODE - 3926909290 C.O.O. - EU

Bright Yellow, woven high density nylon mesh net provides an unbeatable level of protection for cylinders during use and transport. Drawstring cord top and bottom closure provides streamlined accurate fit ensuring strength and security, also covers and protects the base and neck. To suit 7 Litre steel cylinders with a diameter of approximately 140mm and 600mm in length.

Product Code(s):
CNT 7 YW

RRP: £16.25

Cylinder Valve Cap - HS CODE - 84819000 C.O.O. - TW

Cylinder Valve Protection Cap designed to fit most standard types of A-Clamp fitting cross flow cylinder valves to prevent damage and contamination when not connected to a regulator1st Stage. Integral attachment cord allows the Cylinder Valve Cap to be safely and securely fastened to the cylinder valve neck and avoid the risk of loss when the valve is in use. Produced from PVC Poly Vinyl with retention recesses to ensure it remains in place when applied.

Product Code(s):
CVC

RRP: £3.45

Female Alluminium DIN Dust Cap

High quality machined Aluminium protective cover cap for use on SCUBA Diving Regulator 1st Stages, Air Filters, and Compressor Charging Hoses etc. with a standard male EN-144-1 type G5/8” DIN fitting. Metallic Blue in colour, provides protection against damaging dents, scrapes and scratches & also prevents contamination of your DIN fitted components by providing a defensive cover. Conveniently and securely attached to adjacent hoses by simply looping the attached integral cord around the hose, the cord is easily and quickly removed if not required.

Product Options:
Cylinder Accessory Colours Blue
Product Code(s):
DC FDA BE

RRP: £10.75

Female DIN Regulator Dust Cap - HS CODE - 7609000090 C.O.O. - TW

Durable nylon polymer Cover Cap, which will provide a high level of protection against damage caused by scrapes, scratches and dents to SCUBA Diving Regulator 1st Stages fitted with an EN-144-1 type DIN fitting with G5/8” thread. Quickly and conveniently attaches to the regulator inter-stage hose with the supplied cord to avoid loss when not in use. Also ensures that the thread and vital internal components of the first stage remain free from any contamination. Female thread type, which is also perfect to protect the threads on Air Filters, Charging, Hoses, Air Gun fittings and anything else with a DIN G5/8” Male threaded attachment fitting. COLOUR: Black.

Product Code(s):
DC FDN

RRP: £3.95

INT A Clamp Regulator Dust Cap - HS CODE - 7609000090 C.O.O. - TW

Highly Flexible and Durable nylon polymer Cover Cap, which will provide a high level of protection against contamination inside SCUBA Diving Regulator 1st Stages fitted with a INT/A-Clamp type cylinder connection. Quickly and conveniently attaches to the regulator inter-stage hose using the built in recess provided to avoid loss when not in use. May also be used to protect the charging valves on high pressure breathing air compressors, used to fill SCUBA Diving and other breathing air cylinders fitted with the standard INT – A Clamp fitting. COLOUR: Black.

Product Code(s):
DC INT

RRP: £3.85

Male Alluminium DIN Dust Cap

High quality machined Aluminium protective insert, to provide an high level of protection against contamination and possible damage from dents, scrapes etc. to SCUBA Diving or Air Gun type high pressure cylinder valves with a standard Female EN-144-1 type G5/8” DIN fitting. Quickly and simply attached to adjacent hoses etc. by looping the attached integral cord around the hose, the cord is easily and quickly removed if not required. May also be used to protect similar Female threads on Air Filters, Air Gun Fittings etc. Metallic Blue in colour.

Product Options:
Cylinder Accessory Colours Blue
Product Code(s):
DC MDA BE

RRP: £8.50-£10.75

Male DIN Cylinder Valve Dust Cap - HS CODE - 7609000090 C.O.O. - TW

High Quality, extra durable nylon polymer protective insert cap cover to fit SCUBA Diving or Air Gun Cylinder valves with female EN-144-3 Type DIN outlet fitting with a G5/8”thread. Protects & prevents contamination of the DIN outlet fitting, helping extend the life of the Cylinder Valve. Can be quickly and easily attached to a Cylinder Valve with the supplied cord, simply loop around the valve neck. The cord is simply removed, should it not be required, also suitable for use to provide protection and minimise the risk of damage to Air Filters and Air Gun components with female DIN threads. COLOUR: Technical Black.

Product Code(s):
DC MDN

RRP: £3.95

232 Bar DIN Fitting Decanting Hose - HS CODE - 4009120090 C.O.O. - EU

Ideal for decanting air from one cylinder to another and equalising the pressure between two cylinders. With 2 232 Bar EN-144-1 type DIN fittings & 68 cm long hose. 232 Bar unit may be used with DIN to A-Clamp adapter to fit 232 Bar INT-A-Clamp cylinder valves.

Product Code(s):
HS DEC 2

RRP: £122.50

300 Bar DIN Fitting Decanting Hose - HS CODE - 4009120090 C.O.O. - EU

For decanting air from one cylinder to another, pressure will be equalised between the two cylinders. Fitted with 2 EN-144-1 type 300 Bar DIN fittings & 68 cm long hose. May be used with DIN to A-Clamp adapter to fit 232 Bar INT -A-Clamp fitting valves if required.

Product Code(s):
HS DEC 3

RRP: £124.00

Inline Optional Pressure Gauge for Decanting Hoses

Optional Pressure Gauge with male and female 7/16" UNF threads, increases versatility of Beaver Sports Decanting Hoses by providing the means to mix Breathing Air and Nitrox by suitably trained technicians and technical divers in addition to the simpler task of decanting and equalising pressure between two cylinders. This super high quality Pressure Gauge with clear and easy to read multi-coloured face and integral adaptor allows quick and simple installation to either end of the High Pressure Hose on Beaver product references HS DEC 2 and HS DEC 3, 232 or 300 Bar Decanting Hoses. After installation checking pressure in both or either cylinder independently becomes easy.

Product Code(s):
HS DEC PG

RRP: £50.25

Previous 1 2 Next

Showing 1 - 40 of 70 > Page 1 of 2